
17" - 80 Grit Floor Sanding Screens (10 Pack)
- Fits on a 17" Floor Buffer
- 10 Sand Screens per Case
Our 80 grit sand screen is basically sandpaper on a small grid-like sheet. The sand screen attaches to the bottom of our Oreck Low Boy floor sander by attaching it to a normal 17-inch floor scrubbing pad. When a urethane-coated floor gets scuffed, a new layer of urethane may need to be put down. The floor needs to be prepared first. Using a 60-grit sand screen, go over the floor quickly. You do not need to remove a lot of material. You should only remove a little of the coating. You should not sand down to the wood. Remember, it has to be a urethane-coated floor!
Vacuum up all of the dust. Repeat with an 80-grit screen. Vacuum and damp mop up all dust. You may repeat this procedure with a 100-grit screen but in general, it is not needed. This uniform scuff allows the new coating to adhere properly to the floor. Put down urethane coating following product instructions.
*Please Note: This product is not recommended for use on epoxy floors.
Please feel free to return to our full selection of floor buffer sanding screens for other options.