Skip to content
CleanFreak® Dry Surface Orbital Strip Machine - 14" x 20" Thumbnail
Images
Videos

CleanFreak® 14" x 20" Rectangular Floor Buffer

SKU: KOB-00-4503-9    Brand:CleanFreak Go to:Product Resources
$0.00 - $0.00
$1,599.99
$1,599.99 - $1,599.99
$1,599.99
 
In Stock
FREE $158.99 Included in FREE Products w/ this Package
Sold as a Package
See financing options
Product NameQtyPrice
CleanFreak® Dry Surface Orbital Strip Machine - 14
CleanFreak® 14" x 20" Rectangular Floor Buffer
 
In Stock
$1,599.99
22 lbs. Weight for CleanFreak® Dry Stripping Machine
22 lbs. Weight for CleanFreak® Dry Stripping Machine
 
In Stock
FREE!
$158.99 Value

Similar ItemsSimilar

Loading.....
Need a part, call our service department!
Loading.....
Need a part, call our service department!

Product Description

The CleanFreak® 14" x 20" orbital rectangular floor buffer is a versatile machine that can used on many types of tasks. With the use of one of our stripping pads, this unit can be used for top coat dry stripping and complete floor stripping without the use of any chemicals as well as sand screening gym floors when paired with the right set of sand screens. It can also be used for general scrubbing when using one of our scrubbing pads. This buffer is made with a cast iron deck and limited vibration handle which helps to keep down pressure and limiting vibrating while you do your job. The motor on this machine runs on a low 9 amps which allows you to work in older buildings with little worry of blowing circuits. This floor buffer comes with 1 red spacer pad that should be used with other pads to ensure the machine doesn't scrape your floor.

red floor spacer pad Very Important: A red spacer pad is recommended for use on this oscillating floor machine. If you attach some of the thinner accessories to the underside of your machine it will damage your floor. The pad driver has many small pins that hold a pad on - without enough padding those pins will score your flooring.


Features

  • Green machine (eco-friendly) - strip floors without splashing chemicals everywhere.
  • Straight edges allow for buffing deep into corners.
  • Easier to operate than rotary floor buffers.
  • Little handle vibration compared to the competitors.
  • Cast iron heavy-weight chassis for more downforce during stripping.
  • 3500 RPM orbital speed.
  • Cast aluminum rectangular 20" x 14" pad driver plate.
  • Chromed handle 1¼" in diameter made of 13 gauge steel.
  • 5" non-marking wheels.
  • Safety switch to prevent accidental startup.
  • Non marking full wrap bumper.
  • 5 year warranty on the motor & gearbox, and 1 year on parts.
  • A Free 22 lbs. weight is included for when you need extra down force.

Quick Overview

  • For hard floor use only
  • 1.5 HP motor
  • Weighs 111 lbs.
  • 14" x 20" scrubbing path
  • 5 year motor warranty & 1 year on parts
  • Free 22 lbs. weight included.
  • 5 stars: 10 (91%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 1 (9%)
L
Larry Poe
Purchased in June, broken in January

Both front rubber mounts failed on the pad driver. Had to grab a buffer to finish stripping this job. Now we find out how well they stand behind their warranty.

Larry Poe review photo
B
Brenda R
I was amazed how helpful the sales manager was

I was amazed how helpful the sales manager was and so kind and knew exactly what I was wanting on a dry stripping machine. I needed it desperately for a floor job. I ordered it on a Tuesday and received it that Friday. Clean Freak is definitely my kind of company I want to buy all supplies from! I rate them above 5 stars!

V
Victory
Quality design

This equipment you notice very early quality and workmanship that went into the design. I feel very confident that this machine is ready for any task I decides to take on. Used only on carpet with the 14" x 20" square scrubber the torque it applied through the pad to the floor was very impressive.

S
Stripper
Machine was great

Machine works great

t
tony
clean freak floor stripping machine

works great on cleaning the floor only thing is I needed to purchase the weight for it

J
JNS
Square scrubber

We use a Tennant square scrubber and it’s great. You can too scrub dry or wet. Floors come out even and saves time.

Check out our tutorial

M
Mr perfect
Been doing floors for many years ok how about 27 yrs wet stripper is good but this dry strip wit...

It’s good does good job little slower

J
Joe
Orbital strip

The pad want stay under machine

&
"THE WAX TERMINATOR"
Owner

I use this product to strip 16,000 sqft of vct floors at a Big Lot store. This was absolutely the best purchase I've made in years. I love this machine.

M
Mike
happy with purchase

purchased this product to use on side floor jobs. Makes the job easier due to dry scrubbing and not using chemicals. Used also to wet strip with black pad, little hard to control machine and if have a lot of chemical on floor machine will spray out sides. still for the money happy with product

m
maintenance matt
very little vibration and easy to use

I was satisfied there was very little vibration and easy to use. Cut down on my stripping time.

SuperFreak LogoTips from our SuperFreak Service Technicians

Tim C says - "Customers need to know that they can only set the machine down on the grip face when there is a pad attached, or it will damage the grip face. Also, when unloading the machine, you need to make sure to set it down gently. Any drops or jarring of the grip face can easily damage it. Lastly, make sure to only transport it on the wheels, as any heavy bumps could damage the isolators."

Maintenance Tips

  • Never set the machine down on the grip face without a pad attached.
  • When transporting, do not allow for any heavy drops on the grip face, as you could damage it, along with the isolators on the machine.

SuperFreak Tech Tips

Product Specs

Brand
CleanFreak
Manufacturer Sku
00-4503-9
Brush/Pad Size
14 x 20 inches
Brush/Pad Speed
3500 RPM
Color
Black / Blue
Electrical Draw
9 Amps
Electrical Usage
120 volt, 60 Hz
Motor
1.5 HP
Operating Weight (lbs.)
111
Packaged Weight (lbs.)
22
Pad Dimensions
14 x 20 inches
Power Cord
50', 14/3 gauge
Product Type
Hard Floor Cleaning Machines
Scrub Style
Orbital
Sound Output
69 dB
Warranty
5 year warranty on the motor & gearbox, and 1 year on parts & labor (only valid from certified repair centers)
ERP Sku
KOB-00-4503-9

Documents

Product Manual
CleanFreak® Oscillating Floor Machine Manual
CleanFreak® 14" x 20" Oscillating Floor Machine Parts List