Skip to content

20" Round Floor Sanding Screens (60 - 150 Grits Available) - 10 Pack

Original price $79.99 - Original price $116.99
Original price
$116.99
$79.99 - $116.99
Current price $116.99
 
In Stock
10 Screens per Case
Quantity Discounts
Quantity
Discounts
Price
3+
5% off
$111.14
6+
10% off
$105.29
10+
15% off
$99.44
20+
20% off
$93.59

Product Description

These floor sanding screens are commonly used for coatings repair on wood, gym, or painted floor surfaces. Each screen has a diameter of 20", and can be used on both sides. They fit on any 20" floor buffer machine. Just use the screens with a 20" white pad to attach to the bottom of the pad driver. They come in a variety of grades from 60 grit (Extra Aggressive) to 150 grit (Ultra Fine). To achieve the best floor finish, you should progress from the most aggressive screens to the least aggressive. The grit you need to start off with depends on the current condition of your floor and the process you are completing.

The 60 grit extra aggressive sanding screens are commonly used as an initial pad to "rough up" your wood floor before moving on to the less aggressive screens to smooth out your floor until you get the results you are looking for.

The 80 grit aggressive screens are less abrasive than the 60 grit screens, and can either be used as a starter screen to even out a rough wood floor or as the next step down after using the 60 grit screens.

The 100 grit fine screens should be used after prepping the floor with either the 60 or 80 grit sand screens, and are primarily used to smooth out scratches.

The 120 grit extra fine screens are used for very fine sanding and finishing work. They will only remove very light scratches and are often used to buff between coats of finish.

The 150 grit ultra fine screens are commonly used to sand wood floors down to a fine finish to produce a nice smooth surface.

Screens should be rinsed and hung to dry after use to prolong sanding life. Rinsing the screens removes debris and build up in the screen, allowing for a cleaner cutting surface.

*Please Note: This product is not recommended for use on epoxy floors.

Quick Overview

  • Fits on 20" floor buffers
  • 60, 80, 100, 120 & 150 grit options available
  • 10 sand screens per case

Customer Reviews

Based on 5 reviews
40%
(2)
60%
(3)
0%
(0)
0%
(0)
0%
(0)
M
MARK
Use of 60 grit mesh pads.

Pads were used to sand down rough epoxy floor coating. Pretty good life of sanding discs and cut aggressively.

M
Monica
Service Reviewed

Hello All, This is not a review on the product but rather on how great their service is, as we had to return the product because we ordered it incorrectly.
They promptly responded to our inquiries and provided a return label for our product. Thank you, we will be ordering again from You!

M
MARK
Use of 60 grit mesh pads.

The mesh pads performed well, but had to get aggressive with the sander. Which resulted in the drive pad wadding up and had to go to a fiber backed disc to cut through the epoxy with deep air bubbles.

Product Information + Specs

Brand
CleanFreak
Manufacturer Sku
50XX20
Brush Size
20 inches
Brush/Pad Shape
Round
Color
Black
Country of Manufacture
United States
Product Type
Floor Pads, Bonnets & Sanding Screens
Associated ERP Sku
AME-506020
AME-508020
AME-501020
AME-501220
AME-501520