Our 80 grit sand screen is basically a sandpaper on a small grid-like sheet. The sand screen attaches to the bottom of our Oreck Low Boy floor sander by attaching it to a normal 17 inch floor scrubbing pad. When a urethane coated floor gets scuffed, a new layer of urethane may need to be put down. The floor needs to be prepared first. Using a 60-grit sand screen, go over the floor quickly. You do not need to remove a lot of material. You should only remove a little of the coating. You should not sand down to the wood. Remember, it has to be a urethane coated floor!
Vacuum up all of the dust. Repeat with an 80-grit screen. Vacuum and damp mop up all dust. You may repeat this procedure with a 100-grit screen but in general it is not needed. This uniform scuff allows the new coating to adhere properly to the floor. Put down urethane coating following product instructions.
Please feel free to return to our full selection of floor buffer sanding screens for other options.
|Brush/Pad Diameter||17 inches|
|Quantity Per Carton||10|
|Internal Search Number||101473|
Overall Rating (Based on 1 Reviews)
|5 star :||
|( 1 )|
|4 star :||( 0 )|
|3 star :||( 0 )|
|2 star :||( 0 )|
|1 star :||( 0 )|
|Pros||Cons||Best Uses||Used By|
Pros: Easy to Use, Powerful
Best Uses: Business
About Me: Professional Cleaner
Would you recommend this product to a friend? Definitely Yes