Our 60 grit sand screen is basically a sandpaper on a small grid-like sheet. The sandscreen attaches to the Oreck floor sanding machine by "velcro-ing" it to a normal 17" floor scrubbing pad. When a urethane coated floor gets scuffed, a new layer of urethane may need to be put down. The floor needs to be prepared first. Using a 60-grit screen, go over the floor quickly. You do not need to remove a lot of material. You should only remove a little of the coating. You should not sand down to the wood. Vacuum up all of the dust. Repeat with an 80-grit screen. Vacuum and damp mop up all dust. You may repeat this procedure with a 100-grit screen but in general it is not needed. This uniform scuff allows the new coating to adhere properly to the floor. Put down urethane coating following product instructions.
Return to our full selection of floor buffer sanding screens.
|Brush/Pad Diameter||17 inches|
Overall Rating (Based on 1 Reviews)
|5 star :||( 0 )|
|4 star :|
|( 1 )|
|3 star :||( 0 )|
|2 star :||( 0 )|
|1 star :||( 0 )|
|Pros||Cons||Best Uses||Used By|
Pros:Easy to Use, Efficient
About Me:Professional Cleaner
Would you recommend this product to a friend? Definitely Yes